Philips IPLAYER 3 - Manual (Page 4)

Copyright © 2008 Philips Solid-State Lighting Solutions, Inc. All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze,
ColorBurst, ColorGraze, ColorPlay, ColorReach, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite,
iW, iPlayer, Light Without Limits, Optibin, and Powercore are either registered trademarks or trademarks of
Philips Solid-State Lighting Solutions, Inc. in the United States and/or other countries.
All other brand or product names are trademarks or registered trademarks of their respective owners.
Specifications subject to change without notice. Printed in PRC.
PUB-000179-00 R04
Philips Solid-State Lighting Solutions, Inc.
3 Burlington Woods Drive
Burlington, Massachusetts 01803 USA
Tel 888.Full.RGB
Tel 617.423.9999
Fax 617.423.9998
www.colorkinetics.com
Configuration Menus
You can change the following iPlayer 3 options via Configuration mode:
Triggers – Triggers enable you to assign shows to the Preset buttons on the iPlayer 3,
the Preset buttons on the Controller Keypad or the contact switches connected to an AuxBox.
Triggers also specify playback behaviors such as repeat or jump to another show.
Alarms – Alarms enable you to automate show playback by specific time, date, day of the week or
astronomical event.
Setup – The setup menu provides access to port configuration, clock setup, LCD setup, and more.
Info – The info menu displays the device firmware version, memory usage, and more.
At any time during playback, press to launch Configuration mode and open the Main Menu. From the Main
Menu, press and to scroll through menu options and to access a submenu. To save your changes,
continue pressing until you reach the Save Changes menu item, then press a final time to save. Press at
any time to cancel the menu action and return to playback mode.
Example: Changing the Preconfigured Show Assigned to Preset Button 2
Launch Configuration mode, access the Triggers submenu, and then select menu option 2.
Access the Show Type submenu, then select Canned Effect to open the preconfigured show types.
Access the Effect Type submenu, then pick Cross Fade, which produces a smooth transition of from
one solid color to another.
Navigate through the effect-specific submenus, specifying properties for start color, end color,
hold time duration, fade time duration and offset (angle).
At the Test Effect submenu, preview your show, then press to continue.
Select show Transition type Snap (no transition).
Press to save your changes.
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
Firmware Update
The iPlayer 3 firmware image is periodically updated to improve system performance and functionality. If your
iPlayer 3 is not running the most recent firmware, it is recommended that you update to maximize system
performance. The most recent firmware image can be downloaded from
www.colorkinetics.com/support/iplayer3/
Determining Firmware Version
Launch Configuration mode.
Access the Info menu, then select Version. The screen should display the firmware version in the
form v01.00.xx b00001
If the “xx” value is a lower number than the most recent image on the website, follow the firmware
update procedure in the iPlayer 3 User Guide.
1.
2.
3.