Proxim TSUNAMI MP.11 5012-SUR - Manual (Page 12)

Page 12 Copyright © 2006 Proxim Wireless
step 4: View leds/adjust Mounting
LEDs are located in the cable compartment.
When the unit is powered on, the 5012-SUR performs startup diagnostics.
When startup is completed, the LEDs show the operational state of the 5012-
SUR.
The following table shows the status of the LEDs when the 5012-SUR is
operational.
Status Power Wireless.Link Ethernet.Link
Starting up Three red blinks
followed by a
temporary solid
amber N/A N/A
Radio scanning Blinking green N/A N/A
WORP link is up Solid green N/A N/A
No WORP link Blinking amber/
green N/A N/A
System failure Solid red N/A N/A
No traffic on
interface N/A Solid green Solid green
Normal operation
/ passing traffic Solid green Blinking green Blinking green
Bootloader mode Permanent solid
amber N/A N/A
If a wireless link is not established with the BSU, adjust the direction of the unit
so that the integrated antenna is more precisely aimed toward the BSU. When
the Power LED is solid green, the link is correctly established.