Proxim TSUNAMI MP.11 5012-SUR - Manual (Page 15)

All rights reserved Page 1
step 6: tighten Band clamps
Using a 5/16” nutdriver or a screwdriver, fully tighten both band clamps
(maximum torque 50 kg-cm/3.6 lbf-ft).
Secure Ethernet cable to the pole with cable ties. Provide some slack
between the unit and the first cable tie, which should be within 12 inches of
the unit. Continue to secure cable with cable ties at 3-foot intervals.
The final assembly, using the optional Proxim universal pole mounting kit (P/N
1087-UMK), is shown below.
1.
2.