Pioneer VSX-72TXV - Manual (Page 24)

Controls and displays 04
24
En
Remote control
The remote has been conveniently color-coded according
to component control using the following system (press
the corresponding input source button to access):
• Green – Receiver controls (see below)
• Red – DVD controls (page 72)
• Blue – Tuner/XM Radio controls (page 30)
• Yellow – iPod controls (page 45)
• White – Other controls (page 72)
1 RECEIVER
This switches between standby and on for this receiver.
2 INPUT SELECT
Use to select the input source (use SHIFT for INPUT
SELECT
).
3 Input source buttons
Press to select control of other components (see
Controlling the rest of your system
on page 68).
4 Number buttons and other receiver/component
controls
Use the number buttons to directly select a radio
frequency (page 30) or the tracks on a CD, DVD, etc.
DISC (ENTER) can be used to enter commands for TV or
DTV, and also to select a disc in a multi-CD player.
Press RECEIVER first to access:
SLEEP – Use to put the receiver in sleep mode and
select the amount of time before sleep (page 66).
VIDEO SEL – Press repeatedly to select the video
source (page 66).
ANALOG ATT – Attenuates (lowers) the level of an
analog input signal to prevent distortion (page 66).
SR+ – Switches the SR+ mode on/off (page 59).
DIMMER – Dims or brightens the display (page 66).
Press TUNER first to access:
D.ACCESS – After pressing, you can access a radio
station directly using the number buttons (page 30).
CLASS – Switches between the three banks (classes)
of radio station presets (page 31).
5 Tuner/component control buttons/SETUP
These button controls can be accessed after you have
selected the corresponding input source button (DVD/
LD, TV/SAT, etc.). The BAND and T.EDIT tuner controls
are explained on page 30 and page 31. Press RECEIVER
first to access the following controls:
AV PARAMETER – Use to access the AV options
(page 64).
SETUP – Use to access the System Setup menu
(page 32).
CH LEVEL – Press repeatedly to select a channel,
then use
/ to adjust the level (page 43).
RETURN – Press to confirm and exit the current
menu screen (also use to return to the previous menu
with DVDs or to select closed captioning with DTV).
6 (TUNE/ST) /ENTER
Use the arrow buttons when setting up your surround
sound system (see page 32). Also used to control DVD
menus/options and for deck 1 of a double cassette deck
player. Use the TUNE
/ buttons to find radio
frequencies and use ST / to find preset stations
(page 31).
7 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
the TV CONT button. Thus if you only have one TV to hook
up to this system assign it to the TV CONT input source
button. If you have two TVs, assign the main TV to the TV
CONT button (see page 68 for more on this).
SLEEP
+10
SR+
ANALOG
ATT
DISC
VIDEO
SEL
DIMMER
CLASS D.ACCESS
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
ENTER
TV CONTROL
SHIFT
VOL
DVD SAT VIDEO 1 TV CONT
DVR1
TUNE
TUNE
ST ST
STATUS
MCACC S.DIRECT
MULTI OPE
SIGNAL SEL SBch STEREO
MEMORY
TV CH INPUT
SELECT
MPX
AUDIO SUBTITLE
ADV. SURR STANDARD
PHASE
THX
DTV INFO MUTE REC
TV VOL
i Pod TUNER RECEIVER
ENTER
REC STOP
HDD
CH CH
DVD
AV PARAMETER
TOP MENU ì
DTV MENU
CH LEVEL
MENU
T.EDIT
BAND
GUIDE
RETURN SETUP
CATEGORY
CD
DVR2 CD-R
TV VIDEO 2
XM RADIO ROOM2/3
DISP
RECEIVER
4
3
5
7
8
11
9
10
6
12
13
14
15
16
17
18
2
1