Pioneer VSX-72TXV - Manual (Page 62)

Other Settings 09
62
En
• 12V Trigger 1 / 2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger
on page 58), select
M. ROOM, ROOM2, ROOM3 or OFF for the
corresponding trigger setting to switch it on
automatically along with the (main or sub) room
specified.
• PDP In (SR+) – To control certain functions on this
receiver from a plasma display, select the display
input to which you’ve connected the receiver.
1
7 When you're finished, press RETURN.
You will return to the System Setup menu.
Input function default and possible settings
The terminals on the rear of the receiver generally
correspond to the name of one of the input source
functions. If you have connected components to this
receiver differently from (or in addition to) the defaults
below, see
The Input Setup menu above to tell the
receiver how you’ve connected up. The dots ( ì ) indicate
possible assignments.
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Switch on the receiver and your TV.
Use the RECEIVER button to switch on.
2 Press RECEIVER on the remote control, then press
the SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/ / / buttons and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
3 Select ‘Other Setup’ then press ENTER.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• Multi Room Setup – Specify your volume setting for
a multi-room setup and your IR receiver type (see
Multi-Room and IR receiver setup
below).
• SR+ Setup – Specify how you want to control your
Pioneer plasma display (see SR+ Setup for Pioneer
plasma displays
below).
• OSD Adjustment – Adjust the position of the on-
screen display on your TV (see OSD Adjustment
below).
• iLINK Check (VSX-74TXVi only) – Check which i.LINK-
equipped components you have connected, and
which input function they are assigned to (Checking
the i.LINK inputs
on page 50).
5 Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
Note
1 You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite
from the setup in Using this receiver with a Pioneer plasma display on page 58 ) . Note that to control this receiver using the remote, you will
have to point it at the plasma display’s remote sensor after making this connection.
Input
source Input Terminals
Digital i.LINK HDMI Component S-Video
DVD/LD COAX 1 м м м IN 1
TV м м м м IN 2
SAT OPT 1 м м м м
DVR/VCR1 OPT 2 м м м (Fixed)
DVR/VCR2 OPT 3 м м м (Fixed)
VIDEO/GAME1 м м м м м
VIDEO/GAME2 (Fixed) ì (Fixed)
HDMI 1 м м ( HDMI-1)
HDMI 2 м м (HDMI-2)
USB
XM
CD COAX 2 ì
CD-R/TAPE/MD OPT 4 ì
TUNER
PHONO
MULTI CH IN
iPod
iLINK
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
DVD SAT VIDEO 1 TV CONT
DVR1 i Pod TUNER RECEIVER
CD TV VIDEO 2
XM RADIO ROOM2/3 DVR2 CD-R
+10 DISC
CLASS D.ACCESS
ENTER
TV CONTROL
VOL
TUNE
TUNE
ST ST
TV CH INPUT
SELECT TV VOL
ENTER
AV PARAMETER
TOP MENU ì
DTV MENU
CH LEVEL
MENU
T.EDIT
BAND
RETURN RETURN SETUP SETUP
CATEGORY
GUIDE
System Setup
1.Auto MCACC
2.Surr Back System
3.Manual MCACC
4.Data Management
5.Manual SP Setup
6.Input Setup
7.Other Setup
: Exit
7.Other Setup
:Return
a.Multi Room Setup
b.SR+ Setup
c.OSD Adjustment
d.i.LINK Check