Panasonic PT-D10000E - Manual (Page 120)

120 – ENGLISH
Dimensions
Outside dimensions
Installation dimensions diagram
Attention
Leave a clearance of at least 50 cm so that the ventilation opening on the rear panel will not be blocked.
Set up the projector so that air can flow freely around the rear of the projector without staying still. In addition,
leave a space of 30 cm or more at the sides so that the hot air coming out from the air outlet vents does not get
drawn in through the air intake vents.
Set up the projector with a space of 40 cm or more at the front so that the air filter can be replaced.
When the projector is to be placed inside a box and used, leave the clearances shown in Fig. 2 and ensure that
the temperature during operation remains within the 0 °C to 35 °C range. •
•
•
•
unit : mm
MAIN POWER AC IN OFF ON
FILTER
CLEANING
OPEN
CLOSE
578
643
320
unit : mm
MAIN POWER AC IN OFF ON
FILTER
CLEANING
OPEN
CLOSE
578
643
320
(Figure 1 : Dimensions applying when one unit is used) (Figure 2 : Dimensions applying when two units are used)
Exhaust 50 cm or
more
30 cm or more 30 cm or more
Exhaust
Exhaust
50 cm or
more
50 cm or
more
10 cm or more
50 cm or
more
(Figure 1 : Dimensions applying when one unit is used) (Figure 2 : Dimensions applying when two units are used)
Exhaust 50 cm or
more
30 cm or more 30 cm or more
Exhaust
Exhaust
50 cm or
more
50 cm or
more
10 cm or more
50 cm or
more
40 cm or
more
40 cm or more