Panasonic KX-FP121 - Manual (Page 108)

108
Operations
For assistance, call 1-800-435-7329.
Receive mode
Problem Cause & Remedy
I cannot select the desired receive
mode. ● If you set the TAD/FAX, FAX ONLY or TEL/FAX mode:
– Select the desired mode using feature #77 (p. 67), and
– Press
to turn on the AUTO ANSWER light.
● If you set the TEL mode:
– Press
to turn off the AUTO ANSWER light. AUTO ANSWER
AUTO ANSWER
ON
AUTO ANSWER
TAD/FAX ON
OFF
AUTO ANSWER
TAD/FAX ON
Copying
Problem Cause & Remedy
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied documents.
The copied image is distorted.
The printing quality is poor.
The printing is faint.
● You cannot make a copy during programming. Try to make a
copy after programming or stop the programming.
● The glass or rollers are dirty. Clean them (p. 115).
● The thermal head is dirty. Clean it (p. 115).
● Some paper has instructions recommending which side to print
on. Try turning the paper over. We recommend smooth paper
such as Hammermill
Jet Print for clearer printing.
● You may have used paper with a cotton and/or fiber content that
is over 20%, such as letterhead or resume paper. We recommend
smooth paper such as Hammermill
Jet Print for clearer printing. R
R
A B C
Original Copy
Answering device
Problem Cause & Remedy
No voice messages have been
recorded in the TAD/FAX mode.
I cannot retrieve recorded messages
from a remote telephone.
● The memory is full. Erase some or all the messages (p. 90, 96).
● Make sure that you use the remote operation ID correctly (p. 94).