Panasonic KX-FP121 - Manual (Page 21)

21
Initial Preparation Paper tray
Paper stacker (purchasable accessory)
2 Insert the two tabs on the paper tray into the slots
on the back of the unit.
● Do not place the unit in areas where the paper
tray may be obstructed by a wall, etc.
Tabs
Slots
Paper tray
1 Remove the shipping tape from the unit.
Shipping tape
1 Remove the shipping tape from the paper stacker.
2 Lift the front of the unit and insert the paper
stacker into the side slots.
Paper stacker
Side slots
Bottom
3 Confirm if the paper stacker is locked into the
center slots.
Center slots
Paper
stacker
Setup
To stack printed paper, a paper stacker is available as an accessory. To order, see page 16.
(continued)