Adjusting loudness 33 using subwoofer output 33, Adjusting subwoofer settings 33, Audio adjustments – Pioneer KEH-P7020R User Manual

Page 33: Adjusting loudness, Using subwoofer output

Advertising
background image

Audio Adjustments

En

33

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1 Press

AUDIO

to select

Loud

.

Press

AUDIO

until

Loud

appears in the display.

2 Press

5 to turn loudness on.

Loudness level (e.g.,

Loud Mid

) appears in the

display.

3 Press

2 or 3 to select the level.

Press

2 or 3 until the desired level appears in

the display.

Low

(low)—

Mid

(mid)—

High

(high)

4 Press

to turn loudness off.

Loud OFF

appears in the display.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.

1 Press

AUDIO

to select

Sub-W1

.

When the subwoofer controller setting is

S.W

Control:EXT

, you cannot select

Sub-W1

. Press

AUDIO

until

Sub-W1

appears in the display.

2 Press

5 to turn subwoofer output on.

Sub-W1 Normal

appears in the display.

Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.

3 Press

2 or 3 to select the phase of sub-

woofer output.
Press

2 to select reverse phase and

Rev.

appears in the display. Press

3 to select normal

phase and

Normal

appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.

1 Press

AUDIO

to select the

Sub-W2

.

When the subwoofer output is on, you can
select the

Sub-W2

. Press

AUDIO

until

Sub-W2 80

(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as

50

(Hz) or

125

(Hz).

2 Press

2 or 3 to select cut-off frequency.

Press

2 and

50

(Hz) is displayed. Press

3 and

125

(Hz) is displayed. Only frequencies lower

than those in the selected range are output
from the subwoofer.

3 Press

5 or to adjust the output level of

the subwoofer.
Each press of

5 or ∞ increases or decreases

the level of the subwoofer (e.g.,

+6

to

–6

).

Press

5 or ∞ until you see the desired value

displayed.

English

Español

Deutsch

F

rançais

Italiano

Nederlands

07

Section

Advertising