Philips MX3910D/37 - Manual (Page 25)

23
English
buttons on
front panel DVD system’s
display panel
Disc Operations
Turning on/off auto Eco standby mode
This is a power-saving feature, the system
will automatically switch to Eco standby
mode if you do not press any buttons
within 30 minutes after a disc has
stopped playing.
AUTO ECO ON
1
2
STANDBY- ON
13:38
STOP
1
Press and hold STANDBY ON to
switch the system to standby mode.
➜
The clock appears.
2
Press and hold Ç until “
AUTO ECO ON”
appears.
➜
To turn off the setting, repeat step
2
until “
AUTO ECO OFF” appears.
Using the Disc Menu
Depending on the disc, a menu may appear
on the TV screen once you load in the disc.
To select a playback feature or item
●
Use the joystick (1 2 3 4) or
numeric keypad (0-9) on the remote,
then press ÉÅ or
OK to start playback.
To access or remove the menu
●
Press DISC MENU on the remote.
For VCD with Playback Control
(PBC) feature (version 2.0 only)
●
In stop mode, press DISC MENU to
toggle between ‘PBC ON’ and ‘PBC OFF’,
then the playback will start automatically.
➜
If you select ‘PBC ON’, the disc menu
(if available) will appear on the TV. Use
the Joystick (1 2 34) to highlight your
selection and press OK to confirm or use
the to select a play option.
●
During playback, pressing DISC MENU
will return to the menu screen (if PBC is
on).
Basic playback controls
Pausing playback
●
Press ÉÅ.
➜
To resume normal playback, press
ÉÅ again.
Selecting another track/chapter
●
Press S / T or use the numeric
keypad (0-9) to key in a track/chapter
number.
Searching backward/forward
●
Press and hold S / T, then press
ÉÅ to resume normal playback.
➜
While searching, pressing and holding
S / T again will increase the
search speed.
Selecting next disc
●
Press DISC SKIP.
➜
The selected disc will play once, then
stop.
Stopping playback
●
Press Ç.
Resuming playback from the last
stopped point (DVD/VCD)
●
In stop mode and when the disc has not
been ejected, press ÉÅ.
To cancel the resume mode
●
In stop mode, press Ç again.
Helpful Hints:
– Opening the current disc tray or selecting
another disc tray will cancel the resume
feature.
– Resume option may not be available on
some discs.
Replacing discs without interrupting
playback
●
Press OPEN • CLOSE
0 buttons of the
inactive disc trays.
For example, if currently disc tray 1 is
playing, you can replace the discs on disc
trays 2~5.