Panasonic SC-HT07 EN - Manual (Page 22)

Op
eratio
ns
22
RQT7
38
4
Making a recording
INPUT SELECTOR MUSIC AV/MOVE TUNE TUNE
SFC
VIDEO IN L AUDIO IN R VCR 2
AUDIO OUT
VIDEO OUT
Video camera
You can record to a tape deck connected to TAPE REC (OUT)
(SC-HT07), or a DVD recorder/VCR connected to DVR/VCR1
(DVR/VCR) OUT.
1.Press [INPUT SELECTOR] to select the source to be
recorded.
2.Begin recording.
Follow your recording unit’s operating instructions.
3.Start the source to be recorded.
Note
• (SC-HT07) With a tape deck, you can record any analogue
source except TAPE.
With a DVD recorder/VCR, you can record any analogue
source except DVR/VCR1 (DVR/VCR).
• When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
• Some sources do not allow digital recording. Connect through
the analogue terminals and select "ANALOG" input.
.
Recording on other equipment
Using the VCR2 terminals
(for SC-HT07)
These terminals are convenient for equipment you want to
connect only temporarily. Select "VCR2" for input.
INPUT SELECTOR
INPUT SELECTOR MUSIC AV/MOVE TUNE TUNE
^ SFC
VIDEO IN L AUDIO IN R VCR 2
8
MULTI CONTROL
ENTER
TOP MENU
PREV /
RETURN
Change the setting for the DIGITAL IN terminals (OPT1, OPT2,
COAXIAL) on the rear of the unit if the equipment you have
connected is different to that labeled.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “SETUP”.
è
[ENTER] (“D-INPUT” lights.) è
[ENTER]
3.Press [< , >] to select “CD” (SC-HT07 only) , “TV”,
“DVR” or “DVD”.
è
[ENTER]
4.Press [< , >] to select “NONE” (SC-HT07 only) ,
“OPT1”, “OPT2” or “COAX”.
è
[ENTER]
The factory settings are:
Note
You can allocate only one piece of equipment per terminal. So
for example if you change “TV” for “OPT1” to “OPT2”, “DVR” will
automatically switch to “OPT1”.
(For continental Europe and the United Kingdom)
Select the equipment (DVD player or DVD recorder/VCR) whose
audio/video signals you want to output to a television connected
to the AV1 TV OUT terminal on this unit.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “SETUP”.
è
[ENTER]
3.Press [< , >] to select “AV OUT”.
è
[ENTER]
4.Press [< , >] to select “DVD” or “VCR”.
è
[ENTER]
5.Press [< , >] to select “RCA” or “SCART”.
è
[ENTER]
The factory settings are:
DVD: RCA
VCR: RCA
D-INPUT (Digital input)
AV output
The RESET function
The operation settings for the unit will be initialized to the
settings made at the time of shipment.
However, any preset radio stations will not be erased.
MULTI CONTROL
1.Press [TOP MENU].
2.Press [< , >] to select “SETUP”.
è
[ENTER]
3.Press [< , >] to select “RESET”.
è
[ENTER]
4.Press [< , >] to select “YES”.
è
[ENTER]
SC-HT07
CD:
TV:
DVR:
DVD: NONE
OPT1
OPT2
COAX
SC-HT05
TV:
DVR:
DVD: OPT1
OPT2
COAX
Other functions
SC-HT07EB-EN.fm Page 22 Friday, May 7, 2004 4:29 PM