Pharos Science & Applications 505 - Manual (Page 39)

Chapter 4: GPS Function
- 38 -
Viewing the GPS Settings
Your Pocket PC is pre-installed with a GPS-related programs: GPS Power
Control.
GPS Power Control
To view the GPS function settings, tap > Settings > System > GPS
Power Control.
You can use it to directly control GPS function on/off and reset.
Zoom in and Zoom out
When turn on map program, the program will automatically enter the main
screen. Then the buttons of Zoom-in and Zoom-out can work to the map.
l Zoom-in button :
Press Zoom-in button will enlarge the map display.
l Zoom-out button :
Pressing the Zoom-out button will diminish the map display.
Verifying the GPS Function
When purchasing this Pocket PC, first make sure that the GPS function can
work properly. Follow this procedure to verify the GPS function.
A. Use the stylus to press the reset switch on the back side of your Pocket
PC. This will restart the Pocket PC.
B. Perform a “cold boot” on your Pocket PC: press and hold the power
buttons , Program button 3, Program button 4 and the reset switch on the
back side of the Pocket PC. This will return the Pocket PC to the factory
default status. Perform the initial setup and touch screen correction to
enter the Today screen.
(It is not recommended that you use method B. This method should be used
only to verify that GPS functions are working properly and to fix program
conflicts.)
1. Performing a “cold boot” will delete all data stored in the
memory.
NOTE