Pharos Science & Applications 505 - Manual (Page 44)

Chapter 5: Additional Information
- 43-
Clearing Memory
When you initialize your Pocket PC, it returns to the status when it was
purchased.
When you initialize your Pocket PC, all data stored in the
memory is deleted. Your Pocket PC’s initially installed
programs are not deleted.
Before the initialization, remove the SD card.
1. Turn off your Pocket PC.
2. Press and hold the power buttons, Program button 3 and Program button 4 ,
meanwhile, use the stylus to press the reset switch on the back side of
the Pocket PC.
3. Release the Power buttons.
4. When a screen appears, release the reset switch. When the initialization
is complete, the Welcome screen appears.
5. Follow the on-screen instructions to set up the device.
Specifications
Item Description
External dimensions
(L x W x H) Approximately
(121 x 71.8 x 17.22 mm)
Weight Approx. 160 +/- 5g
Operating conditions
CAUTION