Paradyne 6371 User Manual
Page 49
Advertising
![background image](/manuals/184840/49/background.png)
4. DSL Router Configuration Examples
6300-A2-GB20-00
March 2002
4-7
NOTES:
— The
ip routing enable
command is only required when using
firmware version 4.2.5 or higher.
— FUNI/MPOA (1483 routed) link encapsulation can be used with this
configuration and the DSL card Models 8304, 8314, 8344, and 8374. Link
encapsulation is configured on the DSL port. This link encapsulation must
match the core network encapsulation type. The
ip route create
upstream
command is not necessary when using FUNI/MPOA link
encapsulation.
— NAPT is limited to one subnet.
Advertising
This manual is related to the following products: