Philips 725H/05 - Manual (Page 15)

15
GUIDE Plus+
®
Table
Please enter here the data of the TV channels in the GUIDE Plus+ ®
System. This can be helpful if you have to install the GUIDE Plus+ ®
System again or other situations.
Using a pencil helps you to make changes afterwards.
Please observe:
• All data of the GUIDE Plus+ ® System has been loaded. (after 24
hours).
• All TV channels have been allocated to the right programme
numbers Read in the instruction manual the chapter 'Additional
installation features' the section 'allocating/deleting TV channels
manually'.
If TV channels were rearranged, stored or deleted, you have to switch off the
DVD-Recorder (button STANDBY
m ) for approx. 4 minutes.
Only that way the new data can be transferred to the GUIDE Plus+ ® system.
• If you have connected an external Receiver (Satellite receiver, cable
box, ...) write also the programme number of the TV channel from
the external receiver in this list.
• You will find this table in the DVD-Recorder as follows:
- Switch the DVD-Recorder on
- Press GUIDE/TV on the remote control
- Select the menubar using
A ,
- Press as often as necessary C until the field 'Editor' is marked.
Home
Editor displays your TV channel settings. You may
switch channel On or Off (grey), select their Source
and their programme number. Press
Bto use. Press
Dfor Info. Press Cfor Setup.
Search Schedule Info Editor
Name On/Off Source Programme N.
BBC1 On TV P 001
BBC2 On TV P 002
ITV On TV P 003
CH4 On TV P 004
- Copy the displayed table in this list.
- You can go up/down one page using CHANNEL
q ,
CHANNEL r .
The amount of channels is depending on your setup/devices.
Name On /Off Source Programme N.
ENGLISH
Quick install Guide