Panasonic WV-CW964 - Manual (Page 22)

USING THE SETUP MENU
This manual describe procedures for operating system
controller WV-CU650.
All setting configuration procedures start from the
setup menu. This section explains how to display the
setup menu and provides details about the menu items
that it contains.
■ Displaying the Setup Menu
● When using the WV-CU650
(1) Select the camera (this camera), and the
monitor where displays the setup menu.
(2) Press the MENU button to display LCD MENU
CAM 101.
(3) Press the ENTER button or CAM (SET) button to
display CAMERA SETUP.
(4) Press the F1 button.
Refer to the pages below for details.
q CAMERA ID Camera ID Settings
Page 22
w SCENE SELECT Scene Select Settings
Page 23
e PRESET POSITION Preset Position Settings
Page 23
r LANGUAGE Language Setting
Page 25
t ADVANCED SETUP
Advanced Menu Settings
Page 25
■ Camera ID Settings
The camera ID is a series of alphanumeric
characters that indicate the location of the camera.
This item can be used to turn display of the camera
ID on the monitor screen on or off, and to input the
camera ID.
1. Move the cursor to CAMERA ID, and then tilt the
joystick left or right to toggle camera ID display on
and off.
2. Select ON or OFF, and then press the CAM (SET)
button. The factory default setting is OFF.
3. Use the joystick to move the cursor the character
you want to input, and then press the CAM (SET)
button.
This will cause the selected character to appear in
the camera ID input area. Repeat step 3 as many
times as necessary to input all of the characters for
the camera ID. (Example: DOOR)
To input a blank space
Move the cursor to SPACE, and then press the
CAM (SET) button.
To delete all previously input characters
Move the cursor to RESET, and then press the CAM
(SET) button.
To change previously input characters
Use the joystick to move the cursor to the camera
ID input area. Next, tilt the joystick left and right to
move the
↑ pointer to the character you want to
change. Finally, use step 3 above to input the new
character.
4. Move the cursor to POSI, and then press the CAM
(SET) button.
This will display the ID position setting menu.
5. Use the joystick to select a camera ID display
position, and then press the MON (ESC) button.
This registers the camera ID display position and
returns to the camera setting menu.
-22-
MODEL WV-CW964
CAMERA ID OFF
SCENE SELECT
PRESET POSITION
LANGUAGE
→ADVANCED SETUP
q
e
t
w
r
CAMERA ID---
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
---- POSI RET RESET
DOOR............
DOOR
Camera ID Input area
WV-CW964 05.10.19 4:36 PM ページ22