Panasonic WV-CW964 - Manual (Page 25)

-25-
3. Use the joystick to move the cursor the character you
want to input, and then press the CAM (SET) button.
The text input procedure is the same as that for
camera ID input.
See steps 3 through 5 under “Camera ID Settings”
on page 22 for information about inputting the text
for the preset ID and specifying its position on the
display.
To copy the preset ID of another position number
Move the cursor to COPY, and then press the CAM
(SET) button. This displays the preset ID of the
position number preceding the one you are
currently configuring. Each press of the CAM (SET)
button scrolls back to the next sequential position
number and displays its preset ID.
■ Language Setting
1. Move the cursor to LANGUAGE
O, and then press
the CAM (SET) button.
2. On the 8-language selection menu that appears,
select the language you want to use.
The factory default setting is English.
* All of the example screens in these Operating
Instructions show English display messages.
3. Move the cursor to SET, and then press the CAM
(SET) button.
When you switch the languages, the password and
titles are deleted.
* The item that was set flashes when the language is
being changed and stops flashing when the
language has been changed. Do not operate the
system controller when changing settings.
* If you have selected either Japanese or Chinese as
the language, only the IDs and titles can be set in
katakana or Chinese.
* The “LANGUAGE” display remains in English even
when the language setting is changed.
■ Advanced Menu Settings
The advanced setup menu can be displayed from the
setup menu.
1. Display the setup menu (page 22), move the cursor
to → ADVANCED SETUP, and then press the CAM
(SET) button.
This will display the advanced setup menu.
All items can be set on the advanced setup menu.
To switch back to the quick setup menu from the
detailed menu, move the cursor to
→QUICK SET
UP, and then press the CAM (SET) button.
Refer to the pages below for details of setup menu
items.
q CAMERA
Camera Settings Page 26
w PAN/TILT Pan/Tilt Settings Page 31
e ALARM Alarm Settings Page 39
r SPECIAL Special Settings Page 42
t COMMUNICATION* Communication Settings
Page 21
y SCENE SELECT Scene Select Settings
Page 23
u LANGUAGE Language Setting
This page
i QUICK SETUP Quick Menu Settings
Page 22
o PASSWORD LOCK Password Settings
Page 45
* This item appears only when RS485 settings are
configured with the DIP switches.
PRESET NO. 1*
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE
COPY POSI RET RESET
DOOR............
MODEL WV-CW964
CAMERA
PAN/TILT
ALARM
SPECIAL
COMMUNICATION
SCENE SELECT
LANGUAGE
→QUICK SETUP
PASSWORD LOCK OFF
q
e
t
u
o
w
r
y
i
WV-CW964 05.10.19 4:36 PM ページ25