Pyramid Car Audio PR530A - Manual (Page 8)

7
OPERATION
10.CD
Press this key when you wish to listen to the compact disc
player connected to the CD terminals.
11. N/M
You can press this key to select the NORMAL playback
sequence or MEMORY playback sequence.
(P.S: This key only works with our equalizer of our Hi-Fi
system.)
12. NUMBER KEYS
For CD, press the keys from no. 1-10 to select the songs on
the disc from 1 to 10.
(P.S: This key only works with our CD or our HI-FI
system.)
13. VOLUME
Press the key (▲) can increase the volume and (▼) can
decrease the volume.
14. PLAY/PAUSE (
)
Press this button to play and press it once again if wish to
pause. If in pause mode, press this key once again to
resume the operation. (P.S: This key only works with our
CD of our HI-FI system.)
15. STOP (
)
Press this key to stop the playing/fastfwd/fastbwd or any
kinds of such operations.
(P.S: This key only works with our CD of our HI-FI
system.)
16. MEMORY
Using this key for storing your desired playback sequence.
First press this key will change the display to memory state,
then press ( ) or ( ) to reach your desired
track no. Press this key again will store the first track, then
use ( ) or ( ) key again to reach your second
track, press this key again to store the 2 nd track, repeat the
above sequence to store all your desired tracks. Press the
STOP (■) key to terminate the memory storing function.
Now you can playback on your desired sequence by
pressing the PLAY (►) KEY.
(P.S: This key only works with our CD of our HI-FI
system.)
17. MEM CLEAR
if you wish to clear all the memories, you can press this
key once.
(P.S: This key only works with our CD of our HI-FI
system.)
18. FastFWD (
)
The player will skip ahead to the next track each time the
FastFWD ( )button is pressed once. Continuously
pressing this button makes the player scan through the
tracks forward rapidly.
(P.S: This key only works with our CD of our HI-FI
system.)
19. FastBWD (
)
The player will skip backward when FastBWD ( ) is
pressed once. Continuously pressing this button makes the
player scan through the tracks backward rapidly.
(P.S: This key only works with our CD of our HI-FI
system.)
20. REPEAT
Press REPEAT button once, the display will show out
ERPEAT 1 , then the track which is under playback state
or ready state will repeat until you switch off the CD player
or press STOP (■). Press REPEAT button once more,
REPEAT ALL will shown on the display, all tracks will be
repeated until you switch off the CD player or press STOP
(■) button. Press this key again will resume to normal
playback mode.
(P.S: This key only works with our CD of our HI-FI
system.)
21. DISPLAY
Press DISPLLAY button once, the display will show the
Track Remain Time. And press once more, disc Remain
Time will be shown on the Display. Press again can resume
to playback time display.
(P.S: This key only works with our CD of our HI-FI
system.)
REMOTE CONTROL UNIT
Remote controlling instructions
The remote control box can directly control majority of
system functions of HI-FI SYSTEM. The functions include
power control of the whole system, Volume control, sound
field control, CD operation control, Tuner operation
control and also source control function. This remote
controller may not function properly if an obstacle is
located between it and the receiving unit, or if the remote
controller is held at an improper angle with respect to the
receiving unit.
Battery Installation
Remove the rear cover of the remote controller by sliding it
backward. Install two AA (1.5V) size batteries, while
observing the correct polarity [match the (+) and (-) signs].
**Note** Exhausted butteries may reduce the level of
sensitivity of the controller.