Setup, Connections – Panasonic KX-FLB756 User Manual
Page 17
17
Setup
For fax advantage assistance, call 1-800-435-7329.
Connections
!
1
Connect the handset cord.
●
The jack on the longer,
uncoiled end of the handset
cord should be connected to
the unit.
2
Connect the telephone line cord.
3
Connect the power cord.
●
When the power is turned on
for the first time, the unit will
print some basic information.
Note:
●
The warranty does not cover damage due to power line surges or lightning. For additional equipment
protection, we recommend the use of a surge protector.
●
You can connect an answering machine or extension telephone to the external telephone jack (“EXT”) on
this unit (p. 44, 45).
●
When the power is turned on and the display shows the following, unlock the shipping lock (p. 12).
Display:
RELEASE
SHIPPING LOCK
CARRIAGE ERROR
Caution:
●
When you operate this product, the power outlet should be near the product and easily
accessible.
To use the fax machine and a computer modem on the same telephone line
●
We recommend connecting the fax and computer to separate telephone wall jacks when possible.
●
When the fax and modem are not connected to separate telephone wall jacks, and if the computer
modem provides a port for a connecting a telephone, connect the fax machine to this port.
●
Set the fax machine to TEL mode (p. 42).
●
The device which has the shortest ring setting will answer the call first.
/
Handset cord
Telephone
line cord
Line surge
protector
( )
To the single
telephone line
jack (RJ11C)
To the power
outlet
(120 V, 60 Hz)
Power cord
Power surge
protector
( )
Connect to “LINE”.
Longer,
uncoiled end
KX-FLB756 (010-018) 03.4.14 9:07 PM Page 17