Feature operation – Panasonic CU-E12GKE User Manual

Page 5

Advertising

ENGLISH

4)-%2

●

and

operations are available in all

modes and could be cancelled by pressing the respective button
again.

●

and

operations could not be

activated at the same time.

●

and

operations could be activated even when the

air-conditioner is turned off. In this condition, once e-ion indicator
is ON, the unit will operate with AUTO fan speed and air swing.

TO MONITOR AIR QUALITY

• This setting enables the patrol sensor

to automatically detect the air quality.

• When the air quality is unsatisfactory,

e-ion operation will start automatically.

• When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to
achieve the temperature you preferred.

• The timers repeat daily once set.
• If there is a power failure, you can restore the

previous setting (once power is resumed) by pressing
the

button.

• If the timer is cancelled, press

to restore the

previous setting.

● The timer is based on the time set in the remote

control.

● You can set your preferred time for ON and OFF

timers.

TO ENJOY QUIET ENVIRONMENT

• This setting provides a quiet environment by

reducing the airfl ow noise.

TO SELECT FAN SPEED

• There are 5 fan speeds, as well as

automatic*.

* For automatic fan speed, the speed

of the indoor fan is automatically
adjusted according to the operation.

TO ACHIEVE TEMPERATURE QUICKLY

• This setting enables the desired

temperature to be reached quickly.

• POWERFUL operation will run for 20

minutes, after that this operation will stop
automatically.

Select ON

or OFF

timer.

Set the

desired

time.

Confi rm

the setting.

Hints

■ Temperature setting of 1°C higher in cool mode or

2°C lower in heat mode than the desired temperature
performs a 10% power saving.

■ To reduce power consumption during cool mode, close

the curtains to prevent the sunlight and heat from
coming in.

■ To disable the PATROL operation during unit start with

, press and hold

for 5 seconds then

release.

To reset, press

again for 5 seconds then

release.

■ To set either 12-hour (am/pm) or 24-hour time

indication, press and hold

for approximately 5

seconds.

■ To dim the indicator display on the air conditioner:

Press and hold

for 5 seconds.

To reset, press

again for 5 seconds.

■ To switch the temperature setting to °C or °F, press and

hold

for approximately 10 seconds.

To cancel ON or OFF timer, press

, then press

• When you want the air conditioner to turn ON or OFF

automatically at a preset time.

TO SET THE TIMER

FEATURE OPERATION

TIMER SETTING

● To turn off the air conditioner, press

TO ENJOY CLEAN AIR

• This setting provides clean air by producing

negative ions to attract dust which will then
be captured at the positively charged e-ion
fi lters.

TO ADJUST AIRFLOW DIRECTION

• Keeps the room ventilated.
• There are 5 options for vertical airfl ow

direction.

• If automatic vertical airfl ow direction

has been set, the louvers swing up/
down automatically.

• In heat mode, the air blows horizontally

for a while, then starts to blow
downwards.

• Do not adjust the vertical airfl ow

direction louvers by hand.

• Horizontal airfl ow direction louver is

manually adjustable.

Advertising