6 change settings, Access the setup menu, Play from radio – Philips HTS2500/94 User Manual

Page 12: Play audio from tv or other devices

Advertising
background image

10

6 Change

settings

This section helps you to change the settings of
your home theater.

Caution

Most of the settings are already conÀ gured

with the best value for the home theater.
Unless you have a speciÀ c reason to change a
setting, it is best to leave it at the default value.

Access the setup menu

1

Press

SETUP .

The following menu appears.

»

Symbol

Description

[General Setup]

[Audio Setup]

[Video Setup]

[Preference Setup]

2

Select a setup menu, then press OK .

See the following sections for information
about how to change the settings of your
home theater.

3

Press

BACK to return to the previous

menu, or press SETUP to exit.

Note

You cannot change a setting that is grayed out.

Play from radio

The home theater can store up to 40 radio stations.

1

Check that the FM antenna is connected.

2

Press

RADIO .

» AUTO INSTALL...PRESS PLAY ’ appears

on the display panel if you have not
installed any radio stations. Press

.

3

Press the following buttons to control play:

Button

Action

/

Selects a preset radio station.

/

Searches for a radio station.

Fine tunes a radio frequency.

Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.

PROGRAM Manual: Press once to access

program mode, and press again
to store the radio station.
Automatic: Press and hold for À ve
seconds to reinstall radio stations.

Note

AM and digital radio are not supported.

If no stereo signal is detected, or if fewer than

À ve stations are found, you are prompted to
install the radio stations again.
For the best reception, place the antenna away

from the TV or other sources of radiation.

Change tuning grid

In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.

1

Press

RADIO .

2

Press

.

3

Press and hold

until ‘GRID 9’ (50 kHz)

or ‘GRID 10’ (100 kHz) is displayed.

Play audio from TV or other
devices

Press AUDIO SOURCE repeatedly to select the
audio output of the connected device .

EN

Advertising