Philips HTS2500/94 - Manual (Page 13)

11
Change video settings
1
Press SETUP .
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
• [TV Display] : Selects a picture display
format to À t the TV screen.
• [Screen Fit] : Selects a full screen
format that best À ts to the TV screen.
• [Picture Settings] : Selects a
predeÀ ned color setting.
• [Progressive] : Enables or disables
progressive scan mode.
4
Press OK to conÀ rm your choice.
Note
The best setting is automatically selected for •
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
Some video settings depend on the video
•
source, ensure that the disc and the TV
support the setting or feature.
Change general settings
1
Press SETUP .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [DivX(R) VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to conÀ rm your choice.
Note
Before you purchase DivX videos and play •
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Change audio settings
1
Press SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
• [Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
• [Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
4
Press OK to conÀ rm your choice.
English
EN