Philips Inca 311 - Manual (Page 18)

Page 16 2005-12-12
6 TECHNICAL SPECIFICATION
Power requirements +8..40V, 8 Watt (max)
Typically 12..15 Volt
Optics
C-mount
Mechanical
Dimensions:
137 x 75 x 50 mm (l x w x h)
Sensor
Size 2/3”
Number of pixels
1280 x 1024
ADC resolution 10 bits
Regions of interest 1
Exposure time programmable
Inca 311
Frame rate
9.3 or 14 fields / second
Scan modes mirror and flip mode
Gain programmable 0..14 dB
Sub-sampling factor 2 and 4
FPN: < 1.2% pp
PRNU: < 2.5% pp
Inputs
Maximum Ion:
10 mA
Digital input: 6 bits isolated
TTL level compatible
Trigger input: 1 bit isolated
TTL level compatible
Outputs
Maximum Vce:
40 volt, maximum Ic: 10 mA
Digital output: 6 bits isolated
TTL level compatible
Flash output: 1 bit isolated
TTL level compatible
delay and duration
programmable
Watchdog output:
1 bit isolated
TTL level compatible
Reset not
isolated