Panasonic EB-X70 - Manual (Page 118)

118
O
rga
ni
se
r
Review schedule
 Select Menu > Options.
 Select Review.
Changing the schedule layout
You can decide which day you want to have at the start of the week.
 Select Menu > Options > Start of week.
 Select the day.
Jumping to a date
Rather than scrolling through each month on the schedule, you may want to go straight
to a specific date to see whether you have any reminders set.
 Select Menu > Jump.
 Press and hold B to remove the current date.
 Enter the date you want to go to.
 Select Ok.
Calculator
The four function calculator performs simple calculations - addition,
subtraction, multiplication and division.
 Select Calculator.
 Enter a number (maximum 10 digits).
 Use g to select the arithmetic operator.
 Enter another number (maximum 10 digits).
 If the calculation is complete press A to get the result.
 If the calculation is not complete, enter numbers and arithmetic operators, until the
calculation is complete, then press A to get the result.
If you press B :
z before calculation, you will exit Calculator.
z during calculation, a number you have just entered will be deleted.
z while the result is displayed, it will be deleted.
If you press and hold B , the line of numbers entered will be deleted.
Note: To enter a decimal point press #.
Menu
> O
rgani
se
r > Cal
cu
lat
o
r
X70_US_Text.fm Page 118 Tuesday, March 9, 2004 1:21 PM