Panasonic EB-X70 - Manual (Page 32)

32
Voice calls
 Press D.
The first call is put on hold.
Receiving a second call
If Call Waiting is enabled, you can receive a second call. You can check your call
waiting status from Settings > Call Service > Calls > Call Waiting.
Accept or reject a second call
 Press Q.
 Select Accept or Reject.
End current call and receive second call
 Press E.
 Press D to answer the second call.
Operating during two calls
Swapping between calls
An icon (
J
) indicates the current call, when connected to two calls.
 Press Q.
 Select Swap to change to the other call.
Ending current call
 Press Q.
 Select End.
Ending both calls
Press E.
Transferring a call
When you are connected to two calls, you can connect them together, and end your
connections, leaving the two callers to talk to each other.
 Press Q.
Note: This is network dependent R.
Note: You cannot receive more than one fax or data call at a time.
You must end all voice calls before you can make or receive a fax or data call.
Note: If you accept the second call, the current call is put on hold.
X70_US_Text.fm Page 32 Tuesday, March 9, 2004 1:21 PM