Pentax 33WR - Manual (Page 14)

12
1
Getting Started
Powering the Camera
Install batteries in the camera. Use one CR-V3, or use two AA lithium
batteries, AA Ni-MH batteries, or AA alkaline batteries.
Turn off the camera when setting batteries.
Wipe away water or dirt from the camera with a dry cloth before setting
batteries.
Do not set batteries with wet or dirty hands.
1
Slide the battery cover in the direction of the arrow ,
and flip open.
2
Insert the batteries according to the +- indicator in
the battery chamber.
3
Wipe away any sand or debris on the water-resistant
packing and the areas between the camera and the
packing.
4
Close the battery cover and push horizontally to lock.
Installing the Batteries
(Using AA batteries) (Using CR-V3)