Philips 100WT10P - Manual (Page 10)

8
4.1.2 Tap settings
You can use the stylus to tap or double-tap.
Each user's tapping pattern is different.The 100WT10P system
setup process 'learns' each new user's tapping pattern 'signature'.
To test your double-tap pattern:
1.Tap START
2.Tap SETTINGS
* Tap CONTROL PANEL
3. Double tap STYLUS
4. Choose the DOUBLE-TAP
5. Follow the onscreen instructions
To recalibrate the stylus tapping pattern:
1.Tap START
2. Tap SETTINGS
3. Tap CONTROL PANEL
4. Double tap STYLUS
5. Choose the CALIBRATION
6.Tap RECALIBRATION
7. Follow the onscreen instructions
4 DATA INPUT TO THE TOUCH SCREEN