Philips 100WT10P - Manual (Page 23)

21 APPENDIX A: SPECIFICATIONS
Processor
Intel Xscale Processor 400MHz
Operating System
Microsoft Windows CE.NET 4.1
Networking
Built-in 802.11b mini-PCI WLAN module with
integral antenna
Remote Protocol
Microsoft RDP
Citrix ICA
Memory
128 MB SDRAM on board
Flash ROM
32 or 64 MB flash memory module options
LCD Panel Characteristic
10.4 inch Transmissive TFT LCD
Resolution: SVGA, 800 x 600 pixels
Audio System
AC97 internal microphone and speaker;
stereo
supported via earphone jack
Durability
Rugged anti-shock design withstanding 3
feet drop
test
IP53 water and dust resistant construction
Pad I/O
1 x mini VGA out
1 x COM port
2 x USB
1 x USB mini
1 x Audio jack for external earphone
1 x Audio jack for external microphone
1 x DC-in jack
1 x PCMCIA
1 x IrDA
1 x Docking connector
1 x Speaker
1 x Modular connector
1 x Internal microphone
1 x Power LED indicator
1 x WLAN LED indicator
Base Station I/O
1 x DC-in jack
2 x USB
LED indicator
1 x WLAN LED on Pad
1 x Power LED on Pad
1 x Power LED on Base Station
Button and Controls on Pad
4 x Customized hot key
1 x Input panel
1 x Four-way direction key with Enter
1 x Power switch
1 x Stylus release
1 x Wireless latch
2 x Battery latch
1 x Hardware reset
1 x Software reset
Power Supply
Battery:
Swappable smart Li-ion battery pack
AC Adapter Input:
Universal 100V to 240V AC, 50/60 Hz
Output:
60 Watts DC
Dimensions
Pad weight/dimension:
1.6 Kg / 313.5 W x 235.5 H x 29.0 D mm
Base station weight/dimension:
1.0 Kg / 167.0 W x 110.5 H x 122.5 D mm
Included Accessories
Battery
AC adapter and power cord
2 x Stylus
Base station
Mini USB B to A synchronization cable
Mini VGA cable
Optional accessories
Battery charger (for charging 3 batteries)
Extra AC adapter and power cord
Extra battery
Stylus 3-pack
Body glove (planned)
Carrying bag