Connecting to video equipment, Installation, English – Philips Hopper 20 series User Manual
Page 12: Optional), Fig. 2
PAL, NTSC, SECAM
1.
Connect the VIDEO OUT socket of a VCR, Laser Disc player,
video camera or TV to the VIDEO IN socket
(e)
of the
projector.
For this, use the video/audio connection cable
(2)
supplied.
2.
Connect the AUDIO OUT L/R sockets of the VCR, Laser Disc
player, video camera or TV to the AUDIO L/R sockets
(f)
of
the projector.
For this, use video/audio connection cable
(2)
supplied.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector:
1.
Connect the Scart/RCA Audio Video adaptor
(3)
supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2.
Plug the video/audio connection cable
(2)
supplied into both
the adaptor and the VIDEO IN
(e)
and AUDIO L/R sockets
(f)
of the projector.
S-VHS
1.
Connect the S-VIDEO OUT socket of a S-VHS video
recorder, Laser Disc player, video camera or TV to the
S-VIDEO IN socket
(d)
of the projector.
For this use an
(optional)
S-video connection cable
.
2.
Connect the AUDIO OUT L/R sockets of the S-VHS video
recorder, Laser Disc player, video camera or TV to the
AUDIO L/R sockets
(f)
of the projector.
For this, use an
(optional)
audio connection cable.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector:
1.
Connect the Scart/RCA Audio Video adaptor
(3)
supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2.
Plug an
(optional)
audio connection cable or the video/audio
connection cable supplied into both the adaptor and the
AUDIO L/R sockets
(f)
of the projector.
Insert the white plug into the L socket and the red plug into
the R socket.
3.
Plug an
(optional)
S-Video connection cable into the VCR and
the S-VIDEO in socket
(d)
of the projector.
VCR
S-Video
L Audio R
out
S-Video
S-Video
L Audio R
out
VCR
Optional
Optional
Video
out
Video
out
jector
Mouse
Data in
S-Video in
Video in
Audio
out
Audio
in
L
R
Mouse
Data in
S-Video in
Video in
Audio
out
Audio
in
L
R
Power
Data
Audio
Video
Projector
VCR
L Audio R
out
Video
out
L Audio R
out
Video
out
VCR
3
Projector
ector
Mouse
Data in
S-Video in
Video in
Audio
out
Audio
in
L
R
Mouse
Data in
S-Video in
Video in
Audio
out
Audio
in
L
R
Power
Data
Audio
Video
12
7. INSTALLATION
Connecting to video equipment
English
CONNECTING TO VIDEO EQUIPMENT
General
– The figures in brackets
(1)
correspond to the figures in the diagram on page 10.
The characters in brackets
(a)
correspond to characters in
fig. 2
on page 3.
–
Caution: Always switch off the projector before making any connections.