Precor Assembly Guide Ab-X100 - Manual (Page 12)

Ab-X100 Assembly Guide
page 12
Attach the Seat and Back Pad
Seat Pad
4 - 1¼" buttonhead screws
4 - split washers
4 - flat washers
Back Pad
Back Pad Channel
Support
Main Frame
Attach the Seat and Back Pad
1. Attach the Seat Pad to the Main Frame using
four 1¼-inch buttonhead screws (G)
four split washers (E)
four flat washers (F)
Wrench tighten.
2. Attach the Back Pad to the Back Pad Channel
Support using
four 1¼-inch buttonhead screws (G)
four split washers (E)
four flat washers (H)
Wrench tighten.
This completes the assembly of the Ab-X100.
4 - 1¼" buttonhead screws
4 - split washers
4 - flat washers