Precor Assembly Guide Ab-X100 - Manual (Page 13)

Ab-X100 Assembly Guide
page 13
Clean the Pads and Assembly
Clean the Pads and Assembly
To clean the seat or back pads moisten a clean, soft
cloth in a mild solution of soap and water and wipe the
pads thoroughly. Dry the pads with a clean, dry cloth.
Use the same procedure to clean the Main Frame and
plastic parts.
Frequently, vacuum the floor underneath the Ab-X100
to prevent the accumulation of dust and dirt. If
necessary, use the Footrest to lift the front end and
tip the Ab-X100 onto its wheels to roll it to a different
location.