Panasonic DP-3510 - Manual (Page 5)

5
■ ■ ■ ■ ■
Touch Panel Display Brightness Adjustment
To adjust the brightness of the Touch Panel display, press and while holding down the “C”
(CLEAR) key, keep pressing the “ORIGINAL SIZE/A3” or the “COPY SIZE” keys until the desired
brightness is achieved.
ORIGINAL SIZE/A3 : Dimmer
COPY SIZE
: Brighter
Touch Panel Display
■ ■ ■ ■ ■
Function Categories
Operation Chart
C 2-Sided, 2 Page, Booklet Copy Mode, Multi-Size
Feed and/or SADF function selection.
27
C SORT/FINISH
C Electrical Sort Mode and/or optional Finisher
selection.
37, 84, 89, 94
D ZOOM/EFFECTS
C Zoom Copy Mode or Creative Features (Book, Edge,
Margin, Stamping, Centering, Image Repeat or
Inverse Mode) selection. 38
E
INSERTION/
OVERLAY C Insertion, OHP Interleaving, Overlay or File Edit
Mode selection.
46
F JOB MEMORY C Job Memory Mode selection. 54
B
2-SIDED/ORIG. \
COPY
Tab Name Features See Page
A BASIC MENU
C Initial “Ready to copy” screen.
C Original Mode, Exposure Control and Paper Tray
selection.
C Job selection (Tandem/Remote, Proof Set and etc.).
C Reserved Job(s) verification.
16-26
Getting T
o
Kno
w
Y
our Machine
NOTE
C During the copy operation and after making copies, the fan motor may start
spinning. This is a normal operation and is used to cool
down the copier.
C If you are not going to use the copier for long periods
of time, turn the Main Power Switch on the Back and
the Power Switch on the Left Side of the machine to
the OFF position.
P004-005_4510(pb).p65 7/31/02, 10:44 AM 5