Panasonic DP-3510 - Manual (Page 70)

70
NOTE
C It is necessary to input the Key Operator ID code before changing items on
this page.
∗
When the No. 36 to 39 function is set, turn OFF and ON the Power Switch.
■ ■ ■ ■ ■ Input the Key Operator ID Code to change Settings
Screen
No.
Modes
Initial
Setting
Function
07/09
30 Sleep/Off mode
selection
Selects Sleep or Auto Off mode.
C Sleep, Auto Off Sleep
Sets print of general function.
C Stop, Start 31 General settings print
0
08/09
Input parameter of user machine. 35 Tandem user parameter
Input group ID for address book.
C 0 ~ 99 34 Address book group ID
36 Community Name(1) Selects to change the SNMP of Community
Name (1).
*
C Enables read only.
Function
Selects to change the SNMP of Community
Name (2).
*
C Enables read/write.
37 Community Name(2)
Input the device name when necessary.*
(For Status Monitor/EtherTalk Machine Name) 38 Device Name
Input the device location when necessary.*
(For Status Monitor) 39 Device location
Sets clean the corona wire.
C Off, On 32 Corona wire cleaning
Indicates the MAC address. 33 MAC address
GENERAL FUNCTIONS for Key Operator
Sets the daylight time.
C No, Yes 40 Daylight time Yes
09/09
P070-071_4510(pb).p65 7/31/02, 10:50 AM 70