Panasonic BT-3DL2550E - Manual (Page 19)

19
How to Use the On Screen Menu
(continued)
• This is the menu display.
• It disappears after 2 minutes of inaction.
• You can change position of the display (J page 32,
“MENU POSITION”).
• Options unavailable in 3D mode appear gray and
cannot be selected.
• Use the menu to display and set the time code for HD-
SDI signal input. It also allows you to switch display
mode (VITC, LTC, VUB, LUB).
In VITC and LTC display mode:
• Displays the time code in hours: minutes: seconds: or
frames.
• In drop-frame mode, a different delimiter between
seconds and frames is used.
Note:
• Read errors are displayed as “--:--:--:--”
• Displays the VITC/LTC of the HD SDI signal from
SDI1 terminal when 3D mode is set to SIMUL.
In VUB and LUB display modes:
• BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear
in the stated order. BG: binary group
• The (:) delimiter does not appear.
Note:
• Read errors are displayed as “--:--:--:--”
• Displays the VUB/LUB of the HD SDI signal from
SDI1 terminal when 3D mode is set to SIMUL.
• Display position and character size can be modified
(J page 43, “POSITION” and “FONT SIZE” in the
“DISPLAY SETUP” menu).
• When SDI2 and another input (except for a
combination of SDI1 and SDI2) are used for the split
screen display, TIME CODE and audio level meter
display will not function. In this case, use SDI1.
Menu display
[MAIN MENU]
Displays instructions on menu button operations.
TIME CODE display (TC)
( : ) NDF
( . ) DF
BT-3DL2550PE(VQT2U10)_E.book 19 ページ ２０１０年７月８日 木曜日 午後２時１２分