Panasonic BT-3DL2550E - Manual (Page 43)

43
Main Menu
(continued)
Underlined values indicate factory defaults.
*1 Available during HD-SDI input signals. Displays the signal input from SDI1 (L) when 3D mode is set to SIMUL.
*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is
set to ON and underscan is also on.
DISPLAY SETUP
Sub menu Settings Description
TWO
WINDOW
SIZE L/S
M/M
S/L Selects size of split-screen displays.
<L/S> main window LARGE, sub-window SMALL
<M/M> main window MEDIUM, sub-window MEDIUM
<S/L> main window SMALL, sub-window LARGE
SUB INPUT
SEL. VIDEO
SDI1
SDI2
YP
B
P
R
/RGB
DVI-D
Selects sub-window input in split-screen display.
TIME CODE OFF
ON Turns the time code display on and off. *1
POSITION TOP
LEFT
CENTER
RIGHT Selects position of time code display.
<TOP>
Top center of screen
<LEFT> Bottom left of screen
<CENTER> Bottom center of screen
<RIGHT> Bottom right of screen
FONT SIZE LARGE
SMALL Selects font size of time code display.
<LARGE>
Twice the height and width of menu font size
<SMALL> Menu font size
MODE
SELECT LTC
VITC
LUB
VUB Selects time code display mode. *1
<LTC> Displays linear time code (LTC).
<VITC> Displays vertical interval time code (VITC).
<LUB> Displays user bits included in LTC.
<VUB> Displays user bits included in VITC.
CLOSED
CAPTION OFF
ON Turns closed caption display on and off. *2
MODE
SELECT CC4
CC3
CC2
CC1 Selects the closed caption display mode. *2
2D ONLY
2D ONLY
2D ONLY
2D ONLY
BT-3DL2550PE(VQT2U10)_E.book 43 ページ ２０１０年７月８日 木曜日 午後２時１２分