Panasonic UF-5100 - Manual (Page 39)

Customizing Your Machine
39
Fax Parameter Table
P
rogr
am
m
in
g
Y
our
M
ac
h
in
e
NOTE 1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List,
see page 127.
2. The contents of Fax Parameter may differ depending on the each country’s regulation or
specification.
51 REMOTE
DIAGNOSTIC
1 Invalid Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
2 Valid
52 DIAG. PASSWORD (----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PSWD
(----) Setting a 20-digit password for secured sub-address
communication.
54 FAX FORWARD 1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 100)
2 Valid
56 COVER SHEET 1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 96)
2 On
57 COUNTRY CODE Selecting the country code when installing your machine.
58 LANGUAGE Selecting the language to be shown on the display and
reports.
63 PC-FAX RCV MODE
(For UF-6100 only)
1 Print Selecting how the machine will execute the received Fax
document(s). If the setting is set to either "Upload" or
"Upload & Print" the machine cannot enter the Sleep
Mode..
Print
: Print the received document(s).
Upld & Prt : Print the received document(s) and
upload it’s file.
Upload : Upload the received document file.
2 Upld & Prt
3 Upload
65 PRINT COLLATION 1 Invalid Selecting whether the machine prints out documents in
sequence. (See page 70)
2 Valid
82 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 48 to 50)
Invalid : Stores all documents into memory first before
dialling the telephone number.
Valid : Starts dialling the telephone number immediately
after storing the first page.
2 Valid
99 MEMORY SIZE
(Flash Memory) - - Displays the memory size.
No. Parameter
Setting
Number
Setting Comments