Panasonic UF-5100 - Manual (Page 48)

Sending Documents
48
Memory Transmission
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a"/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex : 9 PAUSE * 5551234
3. This feature is called “Quick Memory Transmission”. If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to “ Invalid”. (See page 39)
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more that one destination.
Ex:
TEL. NO.
5551234❚
3
The document is stored into memory with a file number.
Then starts dialling the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALLING * NO.002
5551234
5 5 5 1 2 3 4
PAUSE