Panasonic KX-FL611 - Manual (Page 44)

4. Fax
42
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating FAX ONLY mode
1 Press {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
3 RINGS [ ±]
L The display will show the ring setting in
FAX ONLY mode.
L The {AUTO ANSWER} light is ON.
2 If you wish to change the ring setting, press
{A}
or {B} repeatedly to display the desired
setting, and press {SET}.
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
4.7 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Caller ID service, this feature
prevents fax reception from calls that do not
show caller information.
Additionally, you can store undesirable phone
numbers in the junk fax prohibitor list; faxes sent
from these phone numbers will not be received
by your fax machine.
L Keep the front cover page open for button
locations.
Important:
L This feature does not work when:
–
the unit is set to the TEL mode, or
– manual reception is performed.
4.7.1 Activating the junk fax
prohibitor
1 Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2 Press {>}.
3 Press {A} or {B} repeatedly to select “ ON”.
4 Press {SET}.
5 Press {MENU} to exit.
L While the junk fax prohibitor is activated,
“
JUNK FAX ON” is displayed.
4.7.2 Storing undesired callers
You can register up to 10 undesired numbers
from the Caller ID list (page 34) if you do not wish
to receive faxes from them.
1 Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2 Press {>} repeatedly to display “ JUNK
LIST SET”.
3 Press {SET}.
4 Press {A} or {B} repeatedly to display the
party you wish to prevent fax reception from.
5 Press {SET}.
L To program other parties, repeat steps 4
to 5.
6 Press {STOP} to exit the program.
{ SET}
{A}{B}
FL611-PFQX2072ZA-en.book Page 42 Thursday, December 21, 2006 11:10 AM