Paxar Monarch 9805 User Manual

Page 3

Advertising
background image

C o n n e c t i n g t h e P o w e r C a b l e

1. Plug the power cable into the

socket. Plug the other end of
the cable into a grounded
electrical outlet.

2. Turn on the printer. Press ( I ) to

turn on and ( O ) to turn off the
printer.

C o n n e c t i n g t h e
C o m m u n i c a t i o n C a b l e

Make sure the printer is off before connecting the cable to
the communication port. The printer uses a 9 pin cable.
Connect the communication cable.

E s t a b l i s h i n g C o m m u n i c a t i o n s

Before the printer can accept print jobs from the host, you must:

◆

Connect the communication cable to the printer and to the host.

◆

Set the communication values on the printer to match those at the
host.

Make sure the printer’s communication values match those at the host.
The factory default values are: Baud: 9600 Word Length: 8 bit
Stop Bits: 1 stop bit Parity: none Flow Control: DTR

Print a test label to check current communication settings. To change
these settings, refer to the optional Packet Reference Manual available
from our Web site or in a printed version by ordering part number
TC9800PM.

U s i n g t h e C o n t r o l P a n e l

The status code box displays a three-digit error code to identify any
printer problem. See "Common Errors" for more information.

Socket

Communication
Port

1

Advertising