Headset indicator light, Headset tones, Headset call control button functions talk time – Plantronics WO101 User Manual

Page 17: Checking headset battery level, Placing the headset in sleep mode

Advertising
background image

Plantronics Savi User Guide

17

Headset Status

Headset Indicator Light

Headset charging

Off

Headset fully charged

Off

Headset in-use

Flashes green

Subscribing

Solid green

Headset Indicator Light

toggling On/Off Headset In-Use Indicator Light

If you are not on a call, you can toggle the headset in-use
indicator light on and off by pressing the headset volume down
button for three seconds.

Headset tones

Out of Range Warning

If you are on a call and go out of the operating range, you will
hear three low tones. You will hear a single mid tone when you are
back in range.

If you stay out of range, active calls will be suspended. Calls will
be re-established upon walking back into range. If you remain out
of range for more than 5 minutes the system will drop the call.

If you are not on a call and go out of the operating range and
press the call control button, you will hear a single tone for the
button press and three low tones for the failure to make a link.

Low Battery Warning

If you are on a call, you will hear a repeating single low tone every
15 seconds indicating the battery is low. You should recharge the
headset immediately.

If you are not on a call and press the call control button, you will
hear three lows tones indicating the battery is low. You should
recharge the headset immediately.

Mute Warning

When mute is activated, you will hear three high tones. These
tones will repeat every 15 seconds while mute is active.

When unmuted you will hear three low tones.

type of Press

Function

Short press

Places, answers, or ends calls

Short press volume up

Increases volume

Short press volume down

Decreases volume

While in a link, long press
volume up (at least 1½
seconds)

Switches between desk phone
and PC audio

While in a link, long press
volume down (at least 1½
seconds)

Mutes or unmutes headset

While not in a link, long
press volume up (at least 1½
seconds)

Places headset in subscription
mode

While not in a link, long press
volume down (at least 1½
seconds)

Enables and disables headset
in-use indicator light

Headset Call Control Button Functions

talk time

The Savi Office system will provide up to 9 hours of talk time. Talk
time will be reduced when operating in wideband mode and/or if
the headset is used consistently at a far distance from the base.

Checking Headset Battery Level

When the system is idle, short press the Base subscribe button
once to get feedback on the headset battery level.

Headset Battery
Level

Base PC LeD

Base Deskphone
LeD

75–100%
50–75%
25–50%
0–25%

Solid green
Flashes green
Flashes yellow
Flashes red

Solid green
Flashes green
Flashes yellow
Flashes red

Placing the Headset in Sleep Mode

If you won’t be using the headset for a long duration and the
headset will not be in the charge cradle, you can put the headset
in sleep mode by pressing the call control button for three
seconds while in an idle state. To exit sleep mode, press the
headset call control button again for three seconds.

Advertising