Philips DCP850 - Manual (Page 21)

BASIC FUNCTIONS
Playing files stored in an SD/MMC card
After connecting an SD/MMC card to this player, you can play audio/video files
stored in the card by selecting the desired file with
3 4 and OK.
Playing files stored in your iPod player
After connecting your iPod player as described in the "Connections" section, you
can play files stored in the iPod player with
2 ;, 1 / 2 (search
backward/forward) and J( / § keys on the DVD player or keys on your
iPod player directly .
TIP
• To recharge your iPod player, you must connect your DVD player to AC
mains (or the car cigarette lighter outlet) and ensure: Your DVD player is
in the power-off mode; OR, The DVD player is in the power-on mode and
the current source is “iPod”.
• Once the battery is running low (the power indicator will flash as a prior
warning), immediately recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the battery life.
• Please take out the tab marked “for 30G iPod” in the dock if you want to
dock a 60G or 80G iPod player.
• It is impossible to recharge your iPod with the built-in battery of the DVD
player.
• Make sure to recharge your iPod player below 35oC.
• After switching on your iPod player, set “TV OUT” to “ON” and select the
“PAL” mode. To play photos in your iPod player, you need to press
2 ; on
your iPod player. Otherwise, there will be no picture on the TFT screen
when you play video files in your iPod player. (See your iPod user’s
manual for detailed operation.)
• For photos stored in your iPod player, only the 2 ; key is available.
✔