Panasonic DMC-GH2 - Manual (Page 115)

115
VQT3A36
Recording
• The travel date setting is memorized even if the camera is turned off.
• In order to record the number of days that have passed since your departure, the
[TRAVEL DATE] must be set to [SET].
• If you set a departure date and then take a picture on a date before this departure date, [-]
(minus) is displayed in orange and the day of the vacation that you took the picture is not
recorded.
• If the travel date is displayed as [-] (minus) in white, there is a time difference that involves date
change between the [HOME] and [DESTINATION]. (It will be recorded)
• The [TRAVEL DATE] feature is disabled when recording [AVCHD] motion pictures.
• While recording motion pictures, the [LOCATION] feature is disabled.
• When Intelligent Auto Mode is selected, the [TRAVEL DATE] feature is disabled. Setting of
other Recording Mode will be reflected.
For details on the [SETUP] menu settings, refer to P55.
You can display the local times at the travel destinations and record them on the pictures
you take.
•
Select [CLOCK SET] to set the current date and time in advance. (P31)
1
Select [WORLD TIME] from the [SETUP] menu, and then press 1.
• When first using the camera after purchasing it, the [PLEASE SET THE HOME AREA]
message appears. Press [MENU/SET], and set the home area on the screen in step
3
.
2 Press 4 to select [HOME], and then press [MENU/SET].
Note
• Return the setting to [HOME] when the vacation is finished by performing steps
1
,
2
and
3
.
• If [HOME] is already set, change only the travel destination, and use.
• If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
Recording Dates/Times at Overseas Travel Destinations (World Time)
3 Press 2/1 to select the home area, and then press
[MENU/SET].
A Current time
B Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area, press
3. Press 3 again to return to the original time.
• The daylight saving time setting only applies to your “home
area”.
4 Press 3 to select [DESTINATION] and then press
[MENU/SET] to set.
C Depending on the setting, the time at the travel destination
area or the home area is displayed.
5 Press 2/1 to select the area the travel destination is in
and then press [MENU/SET] to set.
D Current time of the destination area
E Time difference
• If daylight saving time [ ] is used at the travel destination,
press 3. (The time advances by one hour.) Press 3 again to
return to the original time.
A
B
C
D
E
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 115 ページ ２０１０年１０月１９日 火曜日 午前１１時３分