Panasonic DMC-GH2 - Manual (Page 161)

161
VQT3A36
Connecting to other equipment
Saving the Recorded Still Pictures and Motion
Pictures
Methods to export still pictures and motion pictures to other devices will vary depending on
the file format. (JPEG, RAW, MPO, AVCHD, or Motion JPEG). Here are a few suggestions.
∫ Copy by inserting the SD card into the recorder
File formats that can be used: [JPEG], [AVCHD]
• See the instruction manual for the recorder about the details of
copying and playing back.
• Note that the equipment described may not be available in
certain countries and regions.
∫ Copy the playback image using an AV cable
File formats that can be used: [AVCHD], [Motion JPEG]
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using
a Blu-ray Disc Recorder, DVD recorder, or video.
Can be played back with equipment that is not compatible with high-definition (AVCHD),
so it is convenient for distributing copies. Image will be standard quality instead of
high-definition at this time.
1
Connect this unit with the recording equipment with an AV cable (supplied).
2 Start the playback of this unit.
3 Start the recording on the recording equipment.
•
When ending the recording (copying), stop the playback on this unit after stopping the
recording in recording equipment.
It is possible to copy onto Blu-ray disc, DVD disc, or hard disk by inserting an SD
card with still pictures and motion pictures recorded by this unit into a Panasonic
Blu-ray Disc Recorder or DVD Recorder.
Check the latest information about the equipment that can copy directly by inserting the
SD card recorded by this unit, and equipment that is compatible with high definition
(AVCHD) on the following website.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A AV cable (supplied)
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 161 ページ ２０１０年１０月１９日 火曜日 午前１１時３分