Taking pictures using the touch shutter function – Panasonic DMC-GH2 User Manual

Page 38

Advertising
background image

VQT3A36

38

Basic

Applicable modes:

Just by touching the subject to focus, it will focus on the subject and take the picture
automatically.

1

Touch [

] in Recording Mode.

Icon will change to [

], and taking a picture with the

Touch Shutter function becomes possible.

2

Touch the subject you wish to focus on, and then
take a picture.

A Rough indication of the area that can be focused with

the Touch Shutter

AF area with same function as [Ø] in AF Mode is
displayed at the position you touch, and a picture is
taken when it is focused. (This function is unavailable at the extreme edges of the screen.)

If the histogram is displayed on top of the subject you want to touch, touch the subject
after first moving the histogram. (P65)

3

Touch [

] to cancel the Touch Shutter function.

Note

If [FOCUS PRIORITY] is [ON], when the Focus Mode is set to [AFS] and the Touch Shutter
fails, if the AF area briefly turns red and disappears, this signifies that the picture cannot be
taken under the current conditions.
When set to [AFC], the picture will not be taken if the focus indication is flashing green, but if
the subject comes into focus while still touching the screen, the picture will be taken.

Measurement of brightness is performed on the spot touched when the [METERING MODE] is
set to [Ù]. (P121)

Taking pictures using the Touch Shutter function

DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 38 ページ 2010年10月19日 火曜日 午前11時3分

Advertising
This manual is related to the following products: