Panasonic SC-AK310 - Manual (Page 12)

Timer operations
RQT6693
12
A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it off.
During standby mode
Hold down [-DISP/–DEMO] until “NO DEMO” is displayed.
Every time you hold down the button:
NO DEMO (off)
↔
DEMO ON (on)
To show a demonstration of the display
Hold down [ -DISP/–DEMO] until “DEMO ON” is displayed.
Note
DEMO function cannot be turned on when Dimmer is on.
Convenient functions
Auto-off function
Setting the time
Remote control only
Turning the demo function off
To dim the display panel
Remote control only
Press [DIMMER].
The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
Switching displays SC-AK310 only
Press [-DISP/–DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal Aurora Peak hold
(OFF)
To mute the volume
Remote control only
Press [MUTING].
Press the button again to cancel.
“MUTING” goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Hold down [–AUTO OFF].
“AUTO OFF” is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, “AUTO OFF” goes out. It
comes on again when you select CD or tape.
To cancel
Hold down [–AUTO OFF] again.
This is a 12-hour clock.
1 Switch on the power.
2 Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
3 (within 7 seconds or so)
Press [ g , REW/ 3 ] or [ f , 4 /FF] to set the time.
4 Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set
the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
Remote control only
Previous display
CLOCK REC PLAY
SLEEP SLEEP CLOCK CLOCK
TIMER TIMER PL PLAY REC REC AUTO OFF UTO OFF
DISC DISC
PROGRAM PROGRAM
S.SOUND EQ S.SOUND EQ
PRESET EQ PRESET EQ
MUTING MUTING REW REW CLEAR CLEAR
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE
FF FF
1 2 3
4 5 6
7 8 9
0 10 10
CD CD
AUX AUX
TUNER TUNER BAND BAND TAPE TAPE
VOL VOL VOL VOL
SLEEP SLEEP CLOCK CLOCK
TIMER
TIMER
PL PLAY
REC REC AUTO OFF UTO OFF
DISC DISC
PROGRAM PROGRAM
S.SOUND EQ S.SOUND EQ
PRESET EQ PRESET EQ
MUTING MUTING REW REW CLEAR CLEAR
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE
FF FF
1 2 3
4 5 6
7 8 9
0 10 10
CD CD
AUX AUX
TUNER TUNER
BAND BAND
TAPE TAPE
VOL VOL VOL VOL
SLEEP
–AUTO OFF
SLEEP SLEEP CLOCK CLOCK
TIMER
TIMER
PL PLAY
REC REC AUTO OFF UTO OFF
DISC DISC
PROGRAM PROGRAM
S.SOUND EQ S.SOUND EQ
PRESET EQ PRESET EQ
MUTING MUTING REW REW CLEAR CLEAR
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE
FF FF
1 2 3
4 5 6
7 8 9
0 10 10
CD CD
AUX AUX
TUNER TUNER
BAND BAND
TAPE TAPE
VOL VOL VOL VOL