Pentair MiniMax NT Standard Series User Manual

Page 22

Advertising
background image

P/N 472032

Rev. A 1-2-02

22

OFF

SPA

POOL

SET

MODE

PROGRAM

TEMP

TEMP

STEP

Increase

Raise

( )

Decrease

Lower

( )

1. Before changing the temperature, make sure the “Temperature” is in the right window, see pages 22

and 23, if “Time” is displayed, press the MODE key to change to the “Temperature Mode”.

2. To change the Pool Temperature setting, press the POOL key.

SET

MODE

PROGRAM

TEMP

TEMP

STEP

until the desired setting is displayed.

NOTE: During Programming of the Pool Temperature, the two buttons on the
right are used to or the display setting numbers.

NOTE: Pool Temperature is now set.

4. You can leave the right window displaying the set “Temperature” or by pressing

the MODE key, you can return to the “Time” Mode.

NOTE: To re-set the Spa Temperature, follow the above steps 1. through 4.
while in the “Spa Heating” Mode.

3. To Raise or Lower the Pool Temperature setting, press the proper TEMP key

TEMP

TEMP

STEP

OFF

SPA

POOL

Increase

Raise

( )

Decrease

Lower

( )

TO CHANGE THE FACTORY TEMPERATURE SETTINGS:

TIME SETTING

1. Make sure heater is turned “OFF” and not in the POOL or SPA “ON” Mode.

2. Place the Controller in Programming Mode by depressing the SET and MODE buttons at the same time.

NOTE: During Programming of the Time Setting, the two buttons on the right

are used to or the display setting numbers.

Temperature & Time Setting (Programming)

Advertising