Philips AZ 2425/17 - Manual (Page 14)

CD PLAYER
In the stop position, program your CD tracks in the desired
sequence.You can store any track more than once. Up to 20
tracks can be stored in the memory.
• When the program memory is full, the display will show FULL
and it will not be possible to add further tracks to your
current program.
1. Press PROGRAM to enter the programming mode.
™ The display will show PROGRAM and the track number ‘1’.
2. Select the desired track using SEARCH
∞ or § until the
display shows the desired track number.
3. Store the desired track by pressing PROGRAM once.
™ The display will briefly show the number of the track
according to the program sequence and the playing time of
the program, followed by confirmation of your selected
track number and ProG.
4. Repeat steps 2 and 3 to select and store all desired tracks in
this way.
5. To start playback of your CD program, press
PLAY•PAUSE 2;.
Reviewing your program
• To review your set program, keep PROGRAM pressed for a
few seconds until the display changes to show your stored
track numbers in sequence.
Erasing a program
You can erase a program by:
– pressing STOP
9 twice;
– opening the CD door;
– pressing the POWER button.
PROGRAMMING TRACK NUMBERS
14
English
CD PROGRAM
CD PROGRAM
CD PROGRAM
PLAY STOP
PAUSE PLAY STOP
PAUSE
POWER
XP AZ 2425/17 19-09-2000 13:19 Pagina 14