PYLE Audio PLCD20CH - Manual (Page 22)

22
4. OUTPUT FREQUENCY
Turn the switch on the side of the FM Modulator to choose the output frequency
between 89.1 MHz and 88.7 MHz with a screwdriver. When the reception is interfered
with other station on the one frequency, switch to the another frequency.
5. RESET (FOR MODULATOR FUNCTION ONLY)
If the CD Changer locks up or does not work properly, press the reset button with
a pointed object.
6. CD CHANGER
Connect the CD Changer to the FM Modulator by inserting the plug on one end of
the CD Changer cable into the jack on the FM Modulator. Then insert the plug on
the cable’s other end into the jack on the left side of the CD Changer.
7. CD CHANGER COMMANDER
Connect the CD Changer commander to the FM Modulator. Then, insert the CD
Changer controller cable’s plug into the jack on the FM Modulator.