Philips MAGIC 5 MAGIC5 - Manual (Page 19)

Settings 19
EN
Setting the Fax Switch
Fax switch
The built-in fax switch of your device distinguishes be-
tween fax messages and telephone calls. Faxes are automat-
ically received, telephone calls can be received—even on
additionally connected devices. While the device is check-
ing the call, it continues to ring.
Day and Night Mode
You can set how often the device should ring before pick-
ing up separately for the modes
™ (day) and ˜ (night). This
makes it possible for you to receive faxes silently at night
without getting disturbed.
Press ¼/º/» to switch between day and night mode.
With the activated timer
› , the device switches between
the modes ™ (day) and ˜ (night) at the configured times.
Configuring Day Mode
1 Press OK, 51 and OK.
2 Use [ to select the total number of rings. The device
stops the ring after these total number of rings and ac-
cepts a call or a possible silent fax.
3 Confirm with OK.
4 Use [ to select the number of rings for the fax switch.
After the number of rings, the fax switch switches on
and distinguishes between fax transmissions and tele-
phone calls. While the device is checking the call, it
continues to ring.
5 Confirm with OK.
6 Using [, set the volume.
7 Confirm with OK.
Silent fax transmission
Configuring Night Mode
1 Press OK, 52 and OK.
2 Configure the same settings as for the day mode (see
steps 2 to 7).
Setting the Timer
Timer
The timer switches between the modes ™ (day) and ˜
(night) at the configured times.
1 Press OK, 53 and OK.
2 Enter the time at which the machine should switch to
™ (day) mode, for example 06 00 for 6 o'clock
a.m.
3 Confirm with OK.
4 Enter the time at which the machine should switch to
˜ (day) mode, for example 22 00 for 2 o'clock
a.m.
5 Confirm with OK.
Special Settings
Silent Fax Reception
If you would like to accept a fax without preceding rings,
set the number of rings of the fax switch to
0 .
Switching Off All Rings
All Rings Off
If you don't want to be disturbed, e.g. in the night, by any
incoming calls, you can set the number of rings to
0 . The
device switches immediately to silent fax reception.
Printing Lists and Help Pages
Printing Numbers and Entries
List of Numbers
The list of numbers and entries contains the last ten calls
received and numbers dialled as well as the saved entries
and groups.
Press OK, 23 and OK. The list is printed.
Printing the Call List
Call List
The call list contains the last 50 numbers dialled.
1 Press OK, 41 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
4 Switch on printing: Use [, to select whether the
call list should be printed immediately or after every 50
calls.
5 Confirm with OK.
Printing the Telephone Book
Press OK, 17 and OK. The machine prints a list with
the telephone book entries and saved assignments.
Printing Fax Journal
Fax Journal
The fax journal is a list of the last ten faxes sent and re-
ceived.
1 Press OK, 35 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
4 Switch on printing: Use [, to select whether the
fax journal should be printed immediately or after every
ten transmissions.
5 Confirm with OK.
Printing Transmission Report
Printing Transmission Report
After every transmission, the machine prints out a trans-
mission report. If a transmission error occurs, an error re-
port is printed out. You can switch off printing of the
transmission report.
1 Press OK, 36 and OK.
2 Using [ indicate whether you would like to turn
printing on or off.
3 Confirm with OK.
Printing Help Pages
Help 1 · Overview
Press i and 1 to print an overview of the help pages.
Help 3 · Telephone Functions
Press i and 3 to print an overview of the telephone
book functions.
Older devices do not transmit any fax-tone (= CNG
tone) as an announcement for fax transmission (= si-
lent fax transmission). If the total number of rings
has been set to a value using
7 , silent fax transmis-
sions cannot be received automatically.