Pioneer RMF-V4011R - Manual (Page 65)

64
ADJUSTMENTS
(2) TV System
The TV system determines the control of the whole unit (convergence, OSD display select, video system select, deflection)
according to the signal input.
Set it according to the signal input.
When TV SYSTEM is set to AUTO
• The mode is automatically set to NTSC or PAL according to the input signal (NTSC/PAL).
When the TV SYSTEM is set to NTSC
• The mode is set to NTSC regardless of the input signal.
When the TV SYSTEM is set to PAL
• The mode is set to PAL regardless of the input signal.
[Precaution to use]
Normally, the TV SYSTEM is set to AUTO. If the signals cannot be differentiated between NTSC and PAL (or they are differen-
tiated incorrectly : VCR signal repeatedly dubbed or part of CATV converter, etc.), the TV SYSTEM is set to NTSC or PAL
according to the input signal.
When the input signal is NTSC or PAL, and the TV SYSTEM is set to NTSC or PAL, it can enable the input to be switched
smoothly (little screen noises), and prevent signals from being differentiated incorrectly due to signal disturbances and cuts.
In some cases, even if the same TV format is used, more than two types of convergence data will be required. (For example,
when there are signal phase differences for every input source, etc.) In such cases, use two types of memories. Switch them
using the personal computer.